Calibration Record

Measuring and test equipment calibration, ISO 9001 clause 7.1.5

One record per calibration. All readings must be within the acceptable tolerance to pass. If any reading is out of tolerance, the device comes out of service and an Out of Tolerance Impact Study is required.

Device

Type of Device *

ID / Serial Number *

Manufacturer

Model #

Capacity / Range (include units) *

Acceptable Tolerances *

Calibrated In-House? *

Standards Used

Standard 1

Standard 2

Standard 3

Calibration Frequency *

Calibration Due Date

District / Base *

Calibration

Calibration Date *

Calibrated By *

Readings

All readings must be in the tolerance above to pass. The exact number of readings depends on the procedure for the tool type, where one exists.

Reading 1 *

Reading 2

Reading 3

All Readings in Tolerance (OK?) *

Device Status After Calibration *

Notes / Problems

Calibration certificate and photos

Photos and PDFs, 15MB max each. Attachments lock when the form is submitted.

AnthroSafe™ Field Driven Safety